Characteristics of Allergic Harvest PC

The whole set for the building of a 4-meter greenhouse 3 sheets of mobile polycarbonate in the form of rolls of 2.1 m length and a diameter of 60-90 cm. The thickness of this material is 4 mm.

If you would like, you are able to increase the length of the construction to 6 yards or longer. To do this, it is sufficient to join a two-meter extension. When choosing a drawing, focus on the distance between the arches. This figure needs to be 65 cm, and that’s the most appropriate length for the specified thickness of this substance. The diameter of the doorways based on the manufacturer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to select a location because of the place. If this is done correctly, you can provide yourself with a harvest of fresh veggies for the whole year.

The place for your future greenhouse is marked instantly at the planning of the garden plot. So as to melt the snow in the location of their greenhouse as soon as possible, the very best point on the site is going to be a small elevation. In addition, in such a location won’t need to be concerned about high humidity as soil and atmosphere within the construction.

Build a polycarbonate greenhouse on a raised site – intends to take care of the best temperatures indoors.

When it isn’t possible to put a greenhouse in an elevated place, you’ll have to pour a coating of fine shattered rock about 20 cm and the exact same layer of fertile soil to create seedbeds.

Before building a greenhouse in your backyard plot, it’s also wise to think about where and how this construction will be installed. First, you have to select a place for it. The greenhouse ought to be found in a metropolitan region at least a few meters away from homes, barns and other structures.

The best way to Put in a greenhouse Based on the sides of the world

Be sure to measure the soil surface – it’s best to even remove the top layer. This can also eliminate weed seeds. And for simplicity of work, eliminate the soil in an area that’s about a meter wider on both sides of the rectangle that you desire.

In addition, it is worth considering having a foundation. As producers say, now most greenhouses don’t need it, particularly if they (greenhouses) are used just in the summer and spring time. However, experienced gardeners still recommend earning a basic foundation from a bar. It is very simple – it is enough to connect with each other utilizing metal corners and screws four parts of timber with a cross-section of at least 10 * 10 cm. The dimensions of such a foundation should be equivalent to the foundation of their future greenhouse.

Simple gidpostroy.ru bar foundation

You can even earn a strip foundation of concrete. He’s more reliable than a bar base, but demands more fiscal and labor expenses. Incidentally, the greenhouse, which will be utilised in winter, with no and don’t do with it at all.

Stages of the creation of a strip base: a schematic representation

Many manufacturers counsel to set up greenhouse structures without building a foundation. For this intention, they equip the framework with specific T-shaped legs, so the structure was firmly fixed. However, as practice shows, it’s still essential to construct a foundation: so and the foundation will be more firmly fixed and also the elements of the foundation that are in touch with the soil, will be kept much longer in its original state.

The principal issue is to take care of the material with specific agents to protect the wood from moisture. The substance is usually installed on concrete blocks that are dug into the ground. For a six-meter structure, they want 10 bits: four to each side and one in the middle of the endings.

Before you do the greenhouse , you will need to pick the right spot for it. It must be an even website, so the frame was located equally, without distortions. It needs to be sunny and not obscured by trees or buildings.

Nog geen reacties

Geef een reactie